Jokers Racing > All Quad & ATV Parts > Yamaha ATV Parts > Yamaha Raptor 660 Parts

Yamaha Raptor 660 Looney Tuned Dual Exhaust System (LTE Racing)

Yamaha 660 Raptor consists of a 4 piece pipe stainless steel kit with billet flanges and stainless steel T-bolt clamps. 2 silencers with quiet core and spark arrester included. Recovery bottle relocating bracket, Needle jets, Main jets and instructions. Recommended for maximum performance (not included in Exhaust Kit) K&N or UNI air filter with lid removed, a 13.5 HP gain in the mid range and 10.5 HP at peak over stock. 5 lbs lighter than stock.

Yamaha Raptor 660 Stainless Steel Rear Brake Line Kits (American Star)

You are looking at American Star Racings NEW Rear Stainless Steel Brake Lines! These ATV Racing Brake Line Sets are without a doubt the best in the industry today. Tight woven Stainless Steel with a Clear Protective Covering. These lines offer better Brake Feel and Modulation as well as the capability to carry more fluid. This allows the brake fluid to remain cooler allowing better overall braking. They are available in Standard and extended lengths for the rear of all Sport ATV's. Please be sure to select the length you need from the drop down box on the left.

Yamaha Raptor 660 Cooler Rack (AC Racing)

Yamaha Raptor Cooler Rack 01-04 Strap included Ball Burnished.

Yamaha Raptor 660 Digital Thermometer Dipstick (CDB Motorsports)

New from CDB Motorsports, this Direct Reading Digital Thermometer Replacement Dipstrick will allow you to instantly read your oil temperature. Features include readings in degree C or F with the push of a button, accurate readings up to 450 degree F, a large 1 inch Readout Dial with 0.4 inch tall digits and 0.1 degree resolution, Stainless Steel stem, temperature readout dial is both thermal and vibration isolated. This Dipstick Thermometer is a must-have for 440 conversions and extended riding in hot areas.

Yamaha Raptor 660 Gas Cap Breather (ModQuad)

Gas Cap Breather Valve with built in one way check valve. Billet Aluminum with 3" hose. Choose from a variety of colors: Billet Aluminum, Anodized Blue, Anodized Black, Anodized Gold, Anodized Red, Anodized Violet Billet Aluminum
Blue Anodized
Black Anodized
Gold Anodized
Red Anodized
Violet Anodized

Yamaha Raptor 660 Pro Elite Steering Stabilizer (ALBA)

Ride Longer And Harder with Less Fatigue A steering stabilizer is one of the best suspension upgrades you can do for your quad. The elimination of bump-steer and jarring lateral handlebar movements will give you better control and seriously reduce arm fatigue. The adjustable Pro Elite Steering Stabilizer features 7 positions for increased dampening. Because of experience gained in our own race team, we know that racers want a stabilizer that is fully rebuildable - so we've designed this ATV steering stabilizer to be rebuildable. Order the Pro Elite ATV steering stabilizer - it will be the best upgrade you've done for your quad's handling. Features beautiful black anodized clamps and tubing with laser-etched Pro Elite Logo. Features: ~Completely Rebuildable ~7 Adjustment settings ~Easy to install

Yamaha Raptor 660 Outlaw Swingarms (Janssen Motorsports)

Note: Swingarms over 3" are considered custome. Chroming is also considered custome. Custome pieces can take up to 6-12 weeks. Outlaw swingarms have been designed and developed for the hard core racer in all of us. Janssen swingarms feature the utilization of an easily adjustable round housing style bearing carrier. In addition to a fully tig welded 4130 chromoly construction, Janssen's unique oval tube design will ensure a flawless performance in all conditions. Janssen Motorsports is so confident in the construction of their Outlaw products, that they offer a FULL LIFE-TIME WARRANTY against breaking or bending. NOTE: Swingarms will come equipped with pivot bearings and bearing carrier pinch bolts. Swingarms require the use of a Yamaha Banshee rear chain guide and stock Yamaha Raptor front chain guide. The advertised price for Yamaha Raptor swingarms includes the round housing carrier and brake plate Outlaw swingarms are available in lengths varying form -2 to +12 inches. Custom lengths are available over +12 inches for an additional $20 per inch. Outlaw swingarms are available in the following powder-coat color options: Standard Color: Hammer-Tone Gray, Special Order: Blue, Black, Red, Standard Chrome (add $150), Triple Plate Show Chrome (add $300)

Yamaha Raptor 660 Keihin Power Pump (Advantage)

For Keihin FCR carbs ONLY WHAT IS IT? R&D Racing has followed up their successful Power Bowl with an all-new accelerator pump cover that features an adjustable leak jet. WHATS IT DO? Four-stroke engines bog, cough and pop.These problems are caused by everything from air leaks to mis-timed accelerator pumps to air in the pump reservoir to bad jetting to inadequate fuel flow through the leak jet. Of all the bugaboos, the leak jet is the most mysterious. It is also the most troublesome to work on.What is a leak jet? In the simplest terms, a leak jet controls the amount of fuel flowing through the accelerator pump nozzle. The accelerator pumps fuel circuit is split into two paths. The first path is the nozzle to the cylinder head and the second is the return path to the pump reservoir. The leak jet meters the return path. The larger the leak jet, the more fuel is returned to the reservoir with each squirt, which means that less fuel goes to the engine. The smaller the leak jet, the less fuel is returned to the reservoir, while more fuel goes to the engine. In essence, changing the leak jet size changes the amount of fuel that the accelerator pump squirts into the cylinder head. A bigger leak jet will make an engine lean, while a smaller leak jet will make it rich. The R&D Power Pump is an adjustable leak jet. It allows a racer to change the size of the leak jet orifice with a screwdriver (and you can do it with the engine running). WHAT STANDS OUT? (1) STOCK LEAK JET To change a stock Keihin leak jet you have to remove the float bowl from the carb and unscrew the leak jet. Leak jets typically come in sizes from 10 to 100 (a 70 leak jet has an orifice size of 0.70mm). It is a guessing game to select the correct size.This is a time-consuming process (given that most float bowls dont come off modern four-strokes without removing the carb from the bike). (2) POWER PUMP LEAK JET With the Power Pump, the leak jet size is controlled by an adjustable needle and seat. Although the float bowl has to be removed one time to install the supplied plug where the stock leak jet goes, there is never any need to remove the float bowl again. (3) TUNING We tested the Power Pump on our 2008 CRF250, which had some box stock jetting issues. We installed the Power Pump and set the adjustable leak jet at 1-1/2 turns out. We made incremental adjustments and checked them with a throttle blip test. Two turns out would be to the lean side, while one turn out would be rich. We rode the bike at 2 turns, 1-1/2 turns, 1- 1/4turns and 1-1/8th turns. (4) LEAK JET FACTS Our 2008 Honda came stock with a 70 leak jet. We felt improvement as we richened the adjustable leak jet. What does that mean? The large stock leak jet created a lean situation. Our CRF250 ran best with a smaller leak jet orifice somewhere between a 60 and 65 (about 1-1/2 turns). With the Power Pump we were able to fine-tune the setting in seconds. This is a blessing when the temperature drops. (5) PERFORMANCE. Loved it. The bogging disappeared and the power improved considerably. We went from lean to properly jetted in ten seconds. WHATS THE SQUAWK? Delta-Box aluminum frames make getting to the leak jet adjuster a juggling act. We had to use a very long screwdriver, from the right side of the bike, just in front of the shock.

Yamaha Raptor 660 Keihin Power Bowl (Advantage)

WHAT IS IT? A complete float bowl, accelerator pump and fuel supply system for the Keihin FCR carburetor. WHATS IT DO? During the two-stroke era (1967-2004), the nagging carb problems were lean or rich mixtures. Not anymore! Now, on four-stroke engines, bogging, coughing and popping are the bugaboos.The solutions to these problems, most commonly found on the CRF250 and CRF150, range from aftermarket accelerator pump covers to radical jetting changes to accelerator pump linkage mods. R&D Racing, famous for their long association with the Suzuki amateur program, has a totally new solutionwhich doesnt address just one issue in the bogging equation, but every aspect. Its their totally innovative, R&D Power Bowl. WHAT STANDS OUT? (1) FUEL SUPPLY In jumps and whoops, the fuel in the main jet fuel chamber (a little plastic cavity designed to keep a ready supply of fuel available for the main jet) can cavitate.Why? The stock Keihins plastic chamber has excessive clearance under it. The gap allows the fuel in the main jet chamber to get mixed with air bubbles which results in a lean condition. The Power Bowl has a zero tolerance mainjet fuel chamber. It is totally sealed to keep the fuel from sloshing away from the main jet. (2) ACCELERATOR PUMP The R&D Power Bowl is designed with two separate fuel ports. The first orifice is isolated at the highest point of the accelerator pump to vent trapped air out through the leak jet. The second orifice is located low in the fuel sump to insure a supply of air-free fuel to the accelerator pump circuit. (3) LEAK JET The Power Bowl comes with an easy-to-use, externally adjustable leak jet. Additionally, the ball check valve that controls fuel flow has been repositioned to the bottom of the pump to stop it from bouncing open and closed during hard landings (and a nylon check ball is used instead of a steel one to lessen the weight against the ball check spring). (4) PERFORMANCE The MXA wrecking crew tested the R&D Power Bowl over a fourweek test cycle on a CRF150, RM-Z250 and CRF250. We were impressed. On the CRF150, which has a tendency to shoot ducks at full throttle, the popping disappeared and the power improved considerably (so much so that we went up on both the main and the pilot jets).On the RM-Z250, the transition from low-to-mid was enhanced,while the overrev was lengthened. On the CRF250, it eliminated the irritating bog, allowed us to go richer on the jetting and improved overall power. Across the board, throttle response was improved and midrange power increased.

Yamaha Raptor 660 Stage IV Exhaust System (Trinity Racing)

Complete exhaust system for your Yamaha Raptor. Comes in Stainless Steel.

Yamaha Raptor 660 Engine Temperature Gauge (CRJ)

Our CRJ ATV / motorcycle engine temperature gauge will fit almost any liquid cooled atv or motorcycle with standard 7/8" dia handlebars and standard 3/4" dia radiator hose. This is an easy and inexpensive way to monitor your engines coolant temperature for just every day riding or competetive racing. Easy installation, can be installed in 30 minutes with basic tools. ~Temperature range is from - 58F to 302F. ~Display can be switched from Farenhight to Celsius for foreign customers. ~Easy to read at a glance 3/4" tall by 1 1/2" wide display. ~Runs on a small watch style battery which can easily be replaced. Battery typically lasts for 1 year. ~Comes with everything needed to install. Temperature gauge clamps to handlebars and probe coupling mounts into your radiators return hose. Probe coupling has a sensor which penetrates into the coolant to keep an acurate reading of the engines coolant temperature as it exits the engine.

Yamaha Raptor 660 Bulbs (Ricky Stator)

Here is a great stock H6M replacement Bulb that will fit most ATV or even MOTORCYCLE application! 45/45 watt bulbs will not work with stock Banshee stator. YFZ450 stock stator, Raptor 700 stock stator. Choose from Super White Halogen and 35 Watt Xenon!!

Yamaha Raptor 660 Heavy Duty Clutch Kit 2001-2005 (Trinity Racing)

A heavy duty clutch kit for your 2001-2005 Yamaha Raptor 660R.

Yamaha Raptor 660 Steering Stem (Houser Racing)

New cleaner design Isolation mounting Large gussets HOUSER logo powder coated onto stems *NOTE: You MUST use your stock Raptor steering stem bottom Large Gussets for Strength

Yamaha Raptor 660 UNI Air Filter (Competitive Edge)

2005-2007 The principal of how air filters work is simple, open-cell polyurethane foam is wetted with specially developed filter oil. The sticky filter oil is suspended in the path of the dirty air on the strands of the web-like cell structure of the foam. This makes it impossible for dirt to pass through the depth of the filter without sticking to the strands. As the outer strands become loaded with dirt particles, the wetted strands down stream start trapping dirt, allowing the entire thickness to be utilized. This prevents surface loading or air restriction for 80% of the surface life of the air filter element. When the filter is sufficiently dirty it can be easily washed, re-oiled, and re-used. Fits 01-05 Model Years

Yamaha Raptor 660 H Bomb Bumper (H Bomb)

This one of a kind bumper is used by Wes Millers team Bomb Squad. It features an integrated skid plate, a removable face and two built in L.E.D lights that make eyes light up red. Available in polished and textured black only.

Yamaha Raptor 660 Carbon Fiber Thumb Throttle (Alba Action Sports)

Features: ~Awesome Carbon fiber Appearance ~All Billet Aluminum Construction ~Stainless steel inner lever & shaft ~Delrin bushings ~Anodized and chromed components ~O'ring sealed ~Adjustable throw ~Adjustable lever position ~Adjustable cable tension. This throttle can be used on any carburetor up to 44mm. Machined from a solid piece of billet aluminum, it is built to be tough. Every piece is manufactured in the USA and all throttles are anodized for both strength and appearance. Engineered to be light weight and efficient, designed to be interchangeable with stock thumb throttle cable. The caps come with an included O-ring to prevent moisture and sand/dirt from seeping into the throttle box. These throttles come in a variety of colors, including blue, red, black, and chrome.

Yamaha Raptor 660 CROWN Series Steel Rear Brake Lines (Duncan Racing)

Pricing Rear Stainless Steel Brake Line $39.95 Protective Coating Color Options: Clear, Smoke, Blue, Red, Yellow, and Green. Product Features Improved Braking over stock rubber lines Front and Rear Kits offered in various lengths to accomidate differant a-arm and swingarm lengths Teflon inner core Type 304 Stainless steel wire braid external reinforcement Pressure Tested to 4500 psi End Fittings 1218 steel plated Pressure collars 304 stainless steel Multi color options of outer protective sheath New `T` bracket junction, made from steel. Designed with JIC ends that are self-sealing. Offers easier more positive installation, without the need for Teflon tape. Brakelines must be installed with new brake fluid and properly bleed for proper operation. If necessary consult a certified technician. MODEL YEAR STD FRONT LINES +2" FRONT LINES REAR HON TRX250R ALL CR-5100 CR-5125 CR-5150 HON 400EX ALL CR-5400 CR-5425 CR-5450 HON 450R ALL CR-5600 CR-5625 CR-5650 SUZ Z400/KAW KFX400 2003 CR-5200 CR-5225 CR-5250 KAW KFX700 03-04 CR-5300 CR-5325 YAM BLASTER 03-04 CR-5000 CR-5025 CR-5050 YAM BANSHEE 89-04 CR-5700 CR-5725 CR-5750 YAM RAPTOR ALL CR-5800 CR-5825 CR-5850 BOMBARDIER ALL CR-6500 CR-6525 CR-6550 LOBO W/400EX SPINDALS CR-5900 CR-5925 REAR-SPECIAL LENGTH CR-5775 COLOR OPTIONS: RED, BLUE, SMOKE, CLEAR, YELLOW. GREEN Blue Rear Brakeline

Yamaha Raptor 660 CROWN Series Steel Front Brake Lines (Duncan Racing)

Pricing Front Stainless Steel Brake Line Sets complete $109.50 Front sets are supplied with complete line system. From master cylinder to cailpers. Protective Coating Color Options: Clear, Smoke, Blue, Red, Yellow, and Green. Product Features Improved Braking over stock rubber lines Front and Rear Kits offered in various lengths to accomidate differant a-arm and swingarm lengths Teflon inner core Type 304 Stainless steel wire braid external reinforcement Pressure Tested to 4500 psi End Fittings 1218 steel plated Pressure collars 304 stainless steel Multi color options of outer protective sheath New `T` bracket junction, made from steel. Designed with JIC ends that are self-sealing. Offers easier more positive installation, without the need for Teflon tape. Brakelines must be installed with new brake fluid and properly bleed for proper operation. If necessary consult a certified technician. MODEL YEAR STD FRONT LINES +2" FRONT LINES REAR HON TRX250R ALL CR-5100 CR-5125 CR-5150 HON 400EX ALL CR-5400 CR-5425 CR-5450 HON 450R ALL CR-5600 CR-5625 CR-5650 SUZ Z400/KAW KFX400 2003 CR-5200 CR-5225 CR-5250 KAW KFX700 03-04 CR-5300 CR-5325 YAM BLASTER 03-04 CR-5000 CR-5025 CR-5050 YAM BANSHEE 89-04 CR-5700 CR-5725 CR-5750 YAM RAPTOR ALL CR-5800 CR-5825 CR-5850 BOMBARDIER ALL CR-6500 CR-6525 CR-6550 LOBO W/400EX SPINDALS CR-5900 CR-5925 REAR-SPECIAL LENGTH CR-5775 COLOR OPTIONS: RED, BLUE, SMOKE, CLEAR, YELLOW. GREEN

Yamaha Raptor 660 Chozen Performance Axle Nut Covers (Alba Action Sports)

This Axle Nut Covers will add a trick to your bike. Manufactured from quality billet aluminum, these axle nut covers are fashioned in a unique flame or blade design. Individually polished and includes all necessary hardware.

Yamaha Raptor 660 Project 321 Billet / Carbon Fiber Gas Cap (Alba Action Sports)

Check out these awesome new gas caps available in solid billet or with a carbon fiber inlay. With six colors to choose from you'll be sure to find a style that compliments your bike. Blue Gold Red

Yamaha Raptor 660 Billet Polished Throttle Cover (Duncan Racing)

Fits: Yamaha Raptor CNC machined from billet aluminum, then polished Allen bolts includes Installs in minutes Replaces stock cover

Yamaha Raptor 660 AFTERBURNER QUIET EXHAUST SYSTEM (DMC)

The DMC Quiet system is the perfect choice for the track or the trail. Designed to improve the spread of horsepower, torque and acceleration while keeping sound down to strict USFS sound requirements. Features include a completely re-packable extruded alloy silencer with premium packing material, T-304 Stainless steel mid-pipe, AMA/FIM approved end-cap, removable U.S. Forestry approved spark arrestor and DMC S.O.S. (Save Our Sport) quiet insert. The Pro Quiet pipes maximize performance as a full system, but can also be purchased individually as a slip-on muffler or head-pipe. Purpose built to conform to all off road noise regulated applications, our test results show an output less than 96 decibels. HP= 12% GAIN TQ= 14% GAIN Less then 96db* Easy repack, no rivets to drill Stainless steel AMA/FIM endcap Aircraft grade billet muffler bracket USDA spark arrestor included Ultra-tough T304 stainless head and mid pipe Extended length for noise suppression Lightweight Afterburner extruded muffler Includes SOS (baffle assembly) Low center of gravity muffler position

Yamaha Raptor 660 AFTERBURNER COMP EXHAUST SYSTEM (DMC)

These closed course race systems utilize the latest DMC technology to deliver big gains in acceleration, horsepower and torque throughout the entire power band. DMC has captured additional strength and critical weight savings (Low-CG muffler placement) by utilizing extruded alloy and T-304 Stainless Steel construction. The DMC Comp pipes maximize performance as a full system, but can also be purchased individually as a slip-on muffler or head-pipe. The Muffler comes equipped with AMA/FIM approved end-cap and U.S. Forestry approved, removable screen spark arrestor. Silencer is easily re-packable in minutes. The perfect system for those serious about SX, MX or Off-Road racing! HP= 16% GAIN TQ= 15% GAIN Less then 102db* Aircraft grade billet muffler bracket For competition use only Ultra-tough T304 stainless head and mid pipe Stainless steel AMA/FIM endcap Lightweight Afterburner extruded muffler USDA spark arrestor included Low center of gravity muffler position Extended length for noise suppression Easy repack, no rivets to drill Includes SOS (baffle assembly)

Yamaha Raptor 660 Rear Master Cyl. Reservoir Guard (HEP)

HEP Yamaha Raptor Rear Master Cylinder Reservoir Guard is manufactured from .125" aluminum and then powder coated in a clear coat chrome finish standard. All seems are Tig welded. This piece is an exact replacement to the oem plastic guard and mounts with existing hardware in minutes. Extra protection at a great price.

Yamaha Raptor 660 Coolant Return Tank Guard (HEP)

Coolant Return Tank Guard is manufactured from .125" 5052 Aluminum and then powder coated in a clear coat chrome standard. Yamaha has placed this tank in a very vulnerable position to easily get damaged. Protect it with this great looking guard.

Yamaha Raptor 660 L.E.D. Taillight & Brake light kit (HEP)

Our LED Taillight kit was designed to be an oem alternative taillight that will be the last one you will ever need to replace. Our brackets are laser cut from #12 ga. steel and powder coated in a very nice black finish. We designed these to work with a standard 6" oval LED Tail and brake light that for if any reason needed replaced could be bought from any standard lighting store or from us. It is safe to say that these taillight offer 3 times the brightness of your single bulb oem taillight. Very clean and simple design. All kits come complete will all necessary hardware, connections and a detailed installation guide.

Yamaha Raptor 660 Rear Caliper Guard (HEP)

Our Rear Caliper is a unique and inexpensive way to protect your rear braking system from rocks or other damaging debree. This guard is manufactured from .125" aluminum and is a very sturdy piece. Mounts directly to rear caliper with oem hardware in minutes. Will Fit any rear caliper with an 1.125" spacing between mounting bolts. Will not fit Polaris predator or Honda TRX450r. Mounted Caliper Guard

Yamaha Raptor 660 4130 Chromoly Racing Swingarm (American Star)

ASR Oval Tube Chromoly Racing Swing-Arms are without a doubt the very best built, very best looking Swing-Arms in the industry today. Super strong, they are manufactured out of Oval Tube 4130 Aircraft Grade Chromoly Steel. Notice 4 Bolt Pinch Tubes at the rear. Additionally they are available with or without the Rear Billet Aluminum Bearing Carrier.

Yamaha Raptor 660 Double Stainless Steel Front Brake Line Kits (American Star)

You are looking at American Star Manufacturing's NEW Dual Front Stainless Steel Brake Line Sets! These ATV Racing Brake Line Sets are without a doubt the best in the industry today. Tight woven Stainless Steel with a Clear Protective Covering. The Fronts are Dual Lines all the way down from the Reservoir to the calipers. These lines offer better Brake Feel and Modulation as well as the capability to carry more fluid. This allows the brake fluid to remain cooler allowing better overall braking. They are available in Standard and extended lengths for both front and rear. You won't find a better Brake line set anywhere! We Guarantee it!

Yamaha Raptor 660 FCR 39mm Carb Kit

Sudco FCR 39mm Carb Kit

Yamaha Raptor 660 Pack (UPP Racing)

Pack includes Front Chain Slider, Top and Bottom Chain Rollers

Yamaha Raptor 660 Pack for Lonestar Swing-arm (UPP Racing)

Pack includes front chain slider, rear chain slider, top and bottom chain rollers.

Yamaha Raptor 660 Bottom Chain Roller 45mm (UPP Racing)

Supplied with Bearings, Washers, Nut and Bolt. Colos to choose: Red, Blue, Yellow or Black. Red Blue

Yamaha Raptor 660 Top Chain Rollers 42mm (UPP Racing)

Supplied with American made Bearings, Washers, Nut and Bolt. Red Blue

Yamaha Raptor 660 01-05 FLOW EXHAUST SYSTEM (AC Racing)

Flow HVO 01-05 Yamaha Raptor 660 FLOW EXHAUST SYSTEM Unleash the up to 10+ hidden horsepower and torque you've been looking for with our 100% made in the USA exhaust systems. All FLOW sytems are hancrafted from TIG welded mandrel bent aircraft quality 304 stainless steel, a hardened 6063 aluminum muffler housing, and 6061 aluminum front and rear end-caps that are hard annodized to a military spec. that makes them 800% to 1000% harder than raw aluminum. Includes a removable U.S.F.S. spark arrestor. (COMPLETE SYSTEM)

Yamaha Raptor 660 54 Piece Complete Gasket Kit (CDB Motorsports)

54 Piece Complete Gasket Kit From K&S, these kits offer every gasket you will need for a complete rebuild. O.E.M. Quality for long life. Silicone lined coating on base gaskets to keep them from blowing out like the other companies do. Does not include oil seals. Fit 2001 to 2005 model year.

Yamaha Raptor 660 Blingstar Iron Cross Bumper (blingstar)

A Blingstar front bumper for your Yamaha Raptor.

Yamaha Raptor 660 Handle Bar Clamp (ModQuad)

Polished Billet Aluminum Handle Bar Clamp w/ Ignition Switch Cover. Fits Yamaha Raptor 660 ATV's. Choose from the following designs! Cross Design Flame Design "Raptor"

Yamaha Raptor 660 Colored Radiator HOSE KIT (CV4)

CV4 hoses are constructed from pure silicone with polyester reinforcement and can withstand temperatures up to 420 degrees fahrenheit. Unlike the factory hoses, our silicone hoses resist ozone and UV deterioration and are more puncture resistant. With a smoother I.D. coolant flow is also increased. Best of all, they look really good!!! RED BLUE YELLOW BLACK

Yamaha Raptor 660 Polished Aluminum Gas Cap (Armadillo)

Yamaha Raptor 660 Polished Aluminum Gas Cap Built in two way vent. Lets air in but won't let gas splash out. Comes with gasket. Machined from solid 6061 T6 aluminum. Polished to a mirror finish.

Yamaha Raptor 660 Pro Am Series Nerfbar (BlingStar)

The all new Pro-Am series nerfbar comes with two added features! A heavy duty net system with a repeated embroidered logo and an aluminum Blingstar name plate that rivets directly to the nerf. This Nerfbar bolts right to your stock footpeg for easy installation. This Nerfbar is cost effective yet versatile. Nets are already installed. Available in Polished, Gloss Black and Textured Black. (Shown here in polished)

Yamaha Raptor 660 Iron Man Natalie Nerf Bar (BlingStar)

The all new John Natalie Nerfbar comes with two added features! A heavy duty net system with a repeated embroidered logo and an aluminum Blingstar name plate that rivets directly to the nerf. The Natalie Nerf Bar also features our new patent pending bolt-on net mount system. This Nerfbar is specially designed and is manufactured from 6061 T1 Aluminum for light weight and durable protection. Foot pegs come pre-drilled and nets are already installed. Available in polished, gloss black or textured black. (Shown here in textured black) Iron Man Natalie Nerf Bar

Yamaha Raptor 660 Factory Series Nerf Bar (BlingStar)

The all new Factory Series Nerfbar comes with two added features! A heavy duty net system with a repeated embroidered logo and an aluminum Blingstar name plate that rivets directly to the nerf. This nerf was designed specifically for Factory Suzukis Doug Gust and Jeremiah Jones race bikes. Pegs come pre-drilled and nets are already installed. Available in polished, gloss black and textured black. Factory Series Nerf Bar

Yamaha Raptor 660 V2 Bumper (BlingStar)

The V2 is a smaller more compact version of the original Victory bumper. This bumper was designed specifically for GNC champion, John Natalie Jr. Available in polished, gloss black and textured black.

Yamaha Raptor 660 Flight Bumper (BlingStar)

Designed by Pro Rider Kory Ellis, this bumper was built to hit the track from day one. With Kory's "Moto Minded" input, you can count on having the hottest designed race bumper on the gate! Available in Polished Aluminum, Black Gloss or Textured Black. The Flight Bumper

Yamaha Raptor 660 The DC Racer Bumper (BlingStar)

The DC Racer is the first of it's kind and was designed by Dana Creech himself! This bumper is made from .125 aluminum tubing and has a built in number plate frame specifically to hold a custom made Blingstar number plate. All new hardware and custom number plate is included. Available in polished aluminum, gloss black or textured black. Dana Creech Bumper

Yamaha Raptor 660 MX Series Grab Bar (BlingStar)

Our MX Series Grab Bar incorporates a number plate mount for racers and a center flag mount for sand goers. Designed with larger grab points, it helps to move bike around much easier in racing conditions. Used by Dana Creech, Jason Luburgh and John Natalie on his factory Honda. Comes with number plate and hardware. Available in polished, gloss black or textured black. (Note: Once this product is mounted, it does not support the factory brake light)

Yamaha Raptor 660 John Natalie Victory Bumper (BlingStar)

Blingstars new John Natalie "Victory" Bumper was designed and tested by the man himself. This is the bumper that John will use for the 2006 GNC season. Designed with an aggressive look and engineered with 6061 T1 aluminum. Available in polished aluminum, gloss black or textured black.

Yamaha Raptor 660 EVO X Slip On Exhaust (Big Gun)

(01-05) Yamaha Raptor 660 Slip On Lighter than stock, Adds up to 3 horsepower overstock. Standard with USFS approved spark arrestor, Vortex Quiet Insert meets 94db state park requirements, Race Tools pillow packing. (only exhaust system to come with all the above features standard) Jetting necessary. Standard 6 month warranty applies to this product. Also available: -Colored End Caps -End Cap, Spark Arrestor & Vortex Insert Kit -Big Gun EVO Trailer Hitch Reciever Black Anodized
Blue Anodized
Green Anodized
Orange Anodized
Red Anodized
Silver Anodized
Yellow Anodized
End Cap, Spark Arrestor & Vortex Insert
Trailer Hitch Reciever

Yamaha Raptor 660 EVO X Complete Exhaust System (Big Gun)

(01-05) Yamaha Raptor 660 Complete Exhaust System (Silencer Shown) Lighter than stock, adds up to 3.5 more horsepower. Meets AMA 102 db sound requirements also comes standard with USFS approved spark arrestor, Vortex Quiet Insert meets 94db state park requirements, Race Tools pillow packing. (only exhaust system to come with all the above features standard) Re-Jetting necessary. Standard 6 month warranty applies to this product. Also available: -Colored End Caps -End Cap, Spark Arrestor & Vortex Insert Kit -Big Gun EVO Trailer Hitch Reciever Black Anodized
Blue Anodized
Green Anodized
Orange Anodized
Red Anodized
Silver Anodized
Yellow Anodized
End Cap, Spark Arrestor & Vortex Insert
Trailer Hitch Reciever

Yamaha Raptor 660 Spindle Stud Replacement (Hardkor)

These new "state of the art" spindle studs provide both yield and tensile strength increases of 100% over a stock factory stud (ASTM/AISI grade 4130). Extremely fine surface finishes and exclusive design features eliminate stress risers common to mass produced examples. Easily installed with a torch and a press or installation services are available for $15.00 each. Sold individually and nut not included. Part designed for: All Yamaha YFZ450, Raptor

Yamaha Raptor 660 Inner Bearing Spacers 2003 (Hardkor)

We have made installation 100% easier with this newly redesigned inner bearing spacer for your Hardkor billet front hub assembly. Heat is no longer necessary to install these new push on spacers. Minimal bore clearance allows the spacer to slip on the spindle stud and an internal o-ring keeps them held securely in place. Sold in pairs. Part designed for: 2001 - present Yanaha Raptor

Yamaha Raptor 660 Bearing and Seal Rebuild Kit (Hardkor)

Each kit includes all bearings, seals and dust cap O-rings to restore your hubs to new condition. Fits all Honda and Cannondale Models, Yamaha Raptor and YFZ450 (standard and 144mm bolt pattern)

Yamaha Raptor 660 Dust Cap (Hardkor)

Replacement dust cap for all Honda, Cannondale, Raptor, YFZ450, Z400, KFX400 and Predator Hardkor Engineering front hub models. Includes O-ring (installed). Dust Caps are sold individually. Available Colors: BLACK RED BLUE GOLD POLISHED

Yamaha Raptor 660 Trailer Hitch Cover (Pro Armor)

Icon Trailer Hitch Cover Dedicated to protecting your toys and making them look good too. Now we offer accessories for the vehicles that pull your toys. This trailer hitch cover is made from lightweight and durable aluminum. It is powder coated black to resist scratching or chipping. The popular Pro Armor shield is die cut from aluminum and embossed for a 3D raised look. The plate is riveted on to the hitch cover to finish that look for you. Comes with the pin and clip to secure your Icon Trailer Hitch Cover in the receiver. Also included is high density foam to eliminate that annoying rattle that occurs with many other hitch covers.

Yamaha Raptor 660 Thumb Throttle Cover (Hardkor)

No race quad is complete without one of our billet aluminum throttle covers. Made from 6061 aluminum, our covers offer a lightweight alternative to the stock die cast cover and come in any of our four standard anodized colors or polished for those who like the chrome look. We even engrave our logo in the top and throw in new stainless steel allen head cap screws. Available Colors: BLACK RED BLUE GOLD POLISHED

Yamaha Raptor 660 Brake Reservoir Cover for Yamaha (Hardkor)

Looking to replace that plain looking reservoir cover? Hardkor Engineering can give that "race ready look" to your quad with one of our billet aluminum reservoir covers. Each cover has our logo engraved in the top and available in your choice of a polished finish or one of our anodized colors. Includes stainless steel mounting screws. Available Colors: BLACK RED BLUE GOLD POLISHED

Yamaha Raptor 660 Hand Guards (Pro Armor)

Assault Force Sport Hand Guards (standard) Our all new Assault Force Hand Guards are the ultimate in protection and styling. They are lightweight, adjustable and easily installed. Our Sport version is for everyday and trail riding. This part number will fit all standard type handlebars.

Yamaha Raptor 660 Wheel Spacers (CRJ Performance)

CRJ Performances ATV wheel spacers come in two sizes. 3" ( 1 1/2" per side) 5" ( 2 1/2" per side) One set of spacers comes with 8 spacers, enough for two wheels on most quads. These wheel spacers are the toughest you will find when it comes to strength, durability, and ease of use. With our spacers you DO NOT have to remove your stock studs. The spacers female thread screws down on your origional studs and the flat bottom seats tight against the wheel hub which prevents the stock studs and spacers from being able to flex side to side. The wheel is then placed back on over the spacers studs. An extremely strong yet simple design. Our ATV wheel spacers are machined from a patented stress proof steel which is designed specifically for high stress aplications. All wheel spacers come in chrome paint , wheel studs are BLACK OXIDE treated for max rust prevention. FAQ: "Will these spacers break or break my wheel studs?" - Absolutely not. The wheel spacers seat flat against the wheel hub which keeps everything solid and unable to flex. In fact, we have pushed stock axles to the breaking limit numerous times while jumping with our wheel spacers installed. The strength of the wheel spacers should outlast your stock components in a worst case scenario. These wheel spacers fit almost any atv with the common 10x1.25mm wheel studs including the following models. * YAMAHA - (3" size only for rhino) raptor 350 raptor 660 raptor 700 yfz450 banshee warrior blaster kodiak big bear wolverine bear tracker breeze. * HONDA - 250R 250EX 300EX 400EX TRX 450R recon rincon foreman rancher sportrax 90cc. * SUZUKI - vinson quadsport 250 LT R450 LT Z400 elger ozark 250. * KAWASAKI - prairie bayou brute force lakota mojave KFX400 KFX700 v force KFX80. * KASEA - skyhawk 170 250 outback 50 90. * Red Cat - all red cat models over 50cc. * Kazuma - all Kazuma models over 50cc - (Rear Wheels Only). * Eton - all Eton models over 50cc. * Kymco - all Kymco models over 50cc.

Yamaha Raptor 660 Rear Lowering Kit (CRJ Performance)

Fits all Yamaha Raptor models. Rear lowering kit is built from T6 aircraft grade aluminum with a rustproof brass turnbuckle. This kit replaces the stock link that is located below the shock and uses your stock bushings and seals. Comes with grease fitting allready installed. * Fully adjustable from stock height to 4" lower than stock. * Groove in turnbuckle with set screw to prevent linkage from unscrewing itself during use.

Yamaha Raptor 660 Front Lowering Kit (CRJ Performance)

Our ATV front lowering brackets are machined from billet 6061 T6 aircraft grade aluminum. They will lower the front of your atv by 3.5" and widen it by apx. 2". The lowering kit simply fits into the bottom stock shock mount and the shock then mounts to the other end of the lowering bracket. Lowering kits sit flat on the stock a arm gusset plates keeping them from swinging when the front wheels are off the ground. Perfect for ice racing, flat track racing or just added stability. Lowering kits are NOT DESIGNED FOR JUMPING. Will fit on STOCK A ARMS ONLY. Lowers front by 3 1/2" widens by apx. 2".

Yamaha Raptor 660 AC Racing Rear Grab Bar (Trinity Racing)

An aluminum rear grab bar for your Yamaha Raptor.

Yamaha Raptor 660 Dynatek Ignition Kit (Trinity Racing)

The Dyna FS is a direct plug in replacement of the stock ignition that plugs into the stock harness. This Dyna box produces a longer and more intense spark than the stock ignition, adding power & torque. The Dyna FS ignition reprograms your Raptor to release that power with 4 ignition advance curves - 3 high performance and 1 stock curve- which you can easily choose from as you ride. You can also change on the fly by flipping the easily-accessible switch. Only made for 2001-2005 years.

Yamaha Raptor 660 AC Racing Front Bumper (Trinity Racing)

An aluminum front bumper for your Yamaha Raptor.

Yamaha Raptor 660 Exhaust System (Trinity Racing)

Trinity Racing R&D releases the Stage IV exhaust system for the Yamaha Raptor 660R. The Raptor Stage IV exhaust gives you a horsepower increase over the stock exhaust with no additional modifications. The Stage IV is tuned for serious power increases when matched with additional performance parts. The Stage IV System comes complete with the header pipe, muffler and all other necessary hardware, and is constructed from the highest quality stainless steel.

Yamaha Raptor 660 Hand Guards (Pro Armor)

Assault Force Race Hand Guards Our all new Assault Force Hand Guards are the ultimate in protection and styling. They are lightweight, adjustable and easily installed. Universal design fits any ATV. Pick up the Race style for track and competition.

Yamaha Raptor 660 Kill Switch (Pro Armor)

Pro Armor Kill Switch Our Kill Switch features a T handle knob for easier pulling to reset the switch and an internal o-ring for proper sealing to prevent contaminants from entering the main body. Universal design works with any ATV. The durable plastic housing allows for years of abuse. Included adapter allows you to use this with both stock and race style handlebars.

Yamaha Raptor 660 Endurance Computer (Trail Tech)

This is a complete Endurance installation kit. Comes with: -Trail Tech Endurance computer -Integrated speed sensor/cable/computer mount assembly -Adapter for body panel mounting -Handlebar mounting hardware, and instructions. Also available Plastic Handlebar Mounting Hardware Kit and Speed Sensort and Dashboard Handlebar Mounting Hardware
Speed Sensor
Dashboard

Yamaha Raptor 660 Vapor Computer (Trail Tech)

The latest concept in motorsport on-board computation. A combined effort from experts in software, electronics, and mechanical design - each feature of this 4th generation product is carefully crafted and constructed with the offroad enthusiast in mind. -Speedometer -Tachometer -Temperature -Distance -Clock -Power -Model Specific Kits This is a complete Vapor installation kit. Comes with: Trail Tech Vapor computer power wire RPM sensor temperature sensor speed sensor handlebar mounting hardware and instructions. Aluminum protector sold separately...Engine temp. sensor is radiator hose insert (3/4"). Also available: Plastic Handlebar Mounting Hardware Kit, Power and Tach Sensors Kit, and Dashboard Plastic Handlebar Mounting Hardware Kit
Power and Tach Sensors Kit
Dashboard

Yamaha Raptor 660 Replacement Fat Foot Pegs (Pro Armor)

Replacement Fat Pegs Replace your worn fat pegs with our quality replacement pegs.

Yamaha Raptor 660 Peg Insert (Pro Armor)

Fat Peg Insert Make your Fat Pegs even more gnarly with an extra row of teeth designed to keep boots stuck. Made of durable powder coated steel, the Pro Armor Fat Peg Fat Peg Insert was designed and engineered for top riders to give that extra edge. Fits into all existing Pro Armor Fat Peg Nerf Bars!

Yamaha Raptor 660 Trail Tech Logo Plate (Trail Tech)

Brushed stainless steel logo plate: TrailTech

Yamaha Raptor 660 Logo Plate (Trail Tech)

Brushed stainless steel logo plate: Raptor

Yamaha Raptor 660 7/8" Stock Bar Clamp (Trail Tech)

Why change to a custom Trail Tech Bar Clamp? Custom designed, carefully constructed and finished by hand, these clamps are a simple and affordable way to improve the looks and functionality of the controls on most popular sport quads. -Trail Tech bar clamps mount directly to stock steering stem -For most applications, key switch and/or indicator lights are relocated into the clamp -Stainless steel mounting hardware is included Note: Bar clamps are not inteded for use with Trail Tech computers or handlebar mounted light kits. You'll need a dashboard for that. -Custom designed for exact model fit -Machined From 6061-T6 Billet Aluminum -Hand Polished to a Mirror Finish -Stainless Steel Mounting Hardware Included -Replaces the stock upper handlebar clamp

Yamaha Raptor 660 1 1/8" Bar Clamp (Trail Tech)

Why change to a custom Trail Tech Bar Clamp? Custom designed, carefully constructed and finished by hand, these clamps are a simple and affordable way to improve the looks and functionality of the controls on most popular sport quads. Most are available with a logo option or without. YFZ450, Raptor 350, TRX450 and '05-06 Honda 400EX parts include a stem cover for that extra finishing touch. -Trail Tech bar clamps mount directly to stock steering stem -For most applications, key switch and/or indicator lights are relocated into the clamp -Stainless steel mounting hardware is included Note: Bar clamps are not inteded for use with Trail Tech computers or handlebar mounted light kits. You'll need a dashboard for that. -TRX and YFZ clamps adapt to hold lights or computer -Custom designed for exact model fit -Machined From 6061-T6 Billet Aluminum -Hand Polished to a Mirror Finish -Stainless Steel Mounting Hardware Included -Replaces the stock upper handlebar clamp Available WITH Raptor 350 Logo or WITHOUT Logo!!! With Logo
Without Logo

Yamaha Raptor 660 1 1/8" Yamaha Generic Bar Clamps (Trail Tech)

Why change to a custom Trail Tech Bar Clamp? Custom designed, carefully constructed and finished by hand, these clamps are a simple and affordable way to improve the looks and functionality of the controls on most popular sport quads. Most are available with a logo option or without. YFZ450, Raptor 350, TRX450 and '05-06 Honda 400EX parts include a stem cover for that extra finishing touch. -Trail Tech bar clamps mount directly to stock steering stem -For most applications, key switch and/or indicator lights are relocated into the clamp -Stainless steel mounting hardware is included Note: Bar clamps are not inteded for use with Trail Tech computers or handlebar mounted light kits. You'll need a dashboard for that. -TRX and YFZ clamps adapt to hold lights or computer -Custom designed for exact model fit -Machined From 6061-T6 Billet Aluminum -Hand Polished to a Mirror Finish -Stainless Steel Mounting Hardware Included -Replaces the stock upper handlebar clamp

Yamaha Raptor 660 Cross X Handle Bars (Trail Tech)

X-Bars: High Bend High Bend: 1/2" higher than the medium bar at the grips. 107mm x 790mm x 62mm The X-Bars are custom bent for a perfect fit on your quad. X-Bars are ultra strong, reduce vibration and are made from heat treated 7075 aluminum. Available in seven colors and three bends to match your needs. Combine the medium bend (95mm) and a Trail Tech X-Bar clamp to match the height of your stock bars. Accept no ergonomic compromises when you move to 1-1/8 bars.

Yamaha Raptor 660 REAR SKID PLATE (UM Racing)

REAR SKID PLATE Um Performance Products has developed a line of skid plates to accommodate many race teams competing in the âBest of the Desertâ race series. UM Skid Plates have been proven to withstand the brutal conditions found in desert racing. This skid plate is made up from high quality 3/16 inch (.190cm) thick 5052 aircraft aluminum with a double layer of protection in the impact areas measuring 3/8â thick giving you maximum protection. The Rear Skid Plate protects the sprocket (chain) and rear brake rotor from rocks and other damaging objects that may cut your day of riding short.

Yamaha Raptor 660 High Performance CDI (RM Stator)

High Performance CDI The extensive dyno and track testing shows this redesign CDI unit offer much faster ignitions. Increases RPM from 9,000 to 10,000 RPM.

Yamaha Raptor 660 Raptor High Performance CDI (RM Stator)

High Performance CDI The extensive dyno and track testing shows this redesign CDI unit offer much faster ignitions. Increases RPM from 9,000 to 10,000 RPM. Apply to: Yamaha Raptor 660 (Year 01) 30 days warranty. With proof, we will match all the prices on the market. Available for 2001-2005

Yamaha Raptor 660 Pick Up Pulser Coil (RM Stator)

We now offer a brand new pickup coil for your Raptor stator. The pick-up say to the ignition coil when to send the spark Sometimes this is the only thing that fails on the Yamahas.You can do a simple test with a OHMmeter positioned at 2000 your pick-up should read 500 +-50.

Yamaha Raptor 660 COMBO HIGH PERFORMANCE STATOR AND CDI (RM Stator)

We offer you this CDI and Stator Combo. The Stator is complete with Pulser Coil and the Connector Plug . The high performance CDI Box give you a 1000 rpm more and give a progressive advance curve on all the power band. if you have no spark issue that combo will shurely solve your problem. This stator is covered by one year warranty and the HP CDI is covered by one month warranty.

Yamaha Raptor 660 Lowering Kits (Durablue)

Improved Stability! The lowering kits pictured at the top are Plate-type devices that relocate the upper shock position higher, thereby lowering the machine which dramatically improves cornering by lowering the center of gravity without changing the ride quality! The rear strut-type is adjustable much the same way as a tie rod. You can expect about 1" to 1.5" of lowering. It's your high-tech answer to improved cornering. *Lowers the center of gravity without diminishing the ride quality or the suspension travel. *Improves cornering. *Ideal for flat-track or ice racing. **The front lowering kits are not recommended for jumping.**

Yamaha Raptor 660 A Arm Delrin Bushing (ModQuad)
Black Delrin A-Arm Bushings. Fits Banhsee, Raptor, YFZ 450 & Blaster ATV's. Choose from 6 pack or 12 pack. Delrin Blushing also come in Bronze (6 Pack or 12 Pack). 12 Pack Bronze 12 Pack

Yamaha Raptor 660 Adaptor Base (ModQuad)
Yamaha Raptor polished aluminum adaptor base.

Yamaha Raptor 660 Rear Carrier Bearing (ModQuad)
Carrier Bearings are Twin Roller and are CNC Machined from Billet Aluminum. They come complete with brake caliper mount, caliper bushings, and adjustment tool. For aftermarket swingarms only, will not fit stock swingarms. Choose from a variety of colors!!! Also Available for 40mm Drag Bike!! Billet Aluminum
Blue Anodized

Yamaha Raptor 660 Brake Line Clamp 5/16" (ModQuad)
Billet Aluminum Brake Line Clamp for 5/16" brake line and 1" A-arms. Choose color: Billet Aluminum, Blue Anodized, Black Anodized and Red Anodized Billet Alluminum Blue Anodized
Black Anodized
Red Anodized

Yamaha Raptor 660 Tie Rods (ModQuad)
Polished Billet Aluminum Round Tie Rods. Fits Yamaha Raptor 660 ATV's ONLY. Choose from a variety of colors!! Also available Polished Billet Aluminum +2 Round Tie Rods in Billet color only! Billet Aluminum
Blue Anodized
Black Anodized
Red Anodized
+2 Billet Aluminum

Yamaha Raptor 660 Throttle Cover (ModQuad)
Polished Aluminum Throttle Cover. Fits Yamaha Raptor ATV's ONLY. Chose from the following designs! Plain Flaming Teardrop Cross Design Flame Design "Raptor" Design Blue Anodized Flames Black Anodized Red Anodized

Yamaha Raptor 660 Throttle Adjustment Cover (ModQuad)
Polished Aluminum Throttle Adjustment Cover. Fits Yamaha Raptor ATV's ONLY. Plain Flaming Teardrop Cross Design Flame Design "Raptor" Design

Yamaha Raptor 660 Steering Stem Clamp (ModQuad)
Steering Stem Clamp for 7/8" or 1 1/8" handle bars. Made from Billet Aluminum. Comes with Anti-Vibe Bushings and all necessary hardware to attach to our Steering Stems.

Yamaha Raptor 660 Dipstick (ModQuad)
Yamaha Raptor/YFZ450 Polished Billet Aluminum Dipstick. Fits Yamaha Raptor 660 & 700R and YFZ 450 ATV's ONLY. Choose from the following colors! Ploished Billet Aluminum Blue Anodized Black Anodized Red Anodized

Yamaha Raptor 660 Case Saver (ModQuad)
Case Saver Aluminum - Fits Yamaha Raptor ATV's. Aluminum Blue Anodized Aluminum Red Anodized Aluminum

Yamaha Raptor 660 Chain Guard (ModQuad)
Yamaha Raptor Chain Guard with Built-in Case Saver. Polished Billet Aluminum. Fits Yamaha Raptor 660 ATV's ONLY. Diagonal Lines Oval Cutout Cross Flame

Yamaha Raptor 660 Thumb Throttle (ModQuad)
Billet Aluminum Extended Thumb Throttle with designs. Fits Honda 400EX & Choose Design: Arrows, Cross, or Flames Arrows
Cross
Flames

Yamaha Raptor 660 Shock Reservior Clamps (ModQuad)
Billet Aluminum Shock Reservior Clamp Set. Fits 7/8"-1" frame and comes with rubber inserts to fit all shock reserviors. Available in Billet Aluminum, Anodized Blue or Anodized Red Billet Aluminum
Blue Anodized
Red Anodized

Yamaha Raptor 660 Inline Radiator Cooler (ModQuad)
Helps dissipate heat more efficiently, lowering operating temperatures adding life and power to your Quad. Fits all ATV's with 7/8" Radiator Hose. Comes in three sizes. 1" 2" or 3". All Billet Aluminum. Choose from the following colors! Red Anodized Silver Blue Anodized

Yamaha Raptor 660 Rear Brake Resevoir With Cap (ModQuad)
Polished Aluminum Rear Brake Resevoir w/ Cap. Fits Yamaha Raptor, YFZ450, Warrior and Blaster ATV's ONLY. Plain Flame Design and Grooved Scalloped Scalloped Cap Design Flame Design with Scalloped Cap Cross design and Grooved Scalloped cap

Yamaha Raptor 660 Rear Brake Resevoir (ModQuad)
Polished Aluminum Rear Brake Resevoir Without Cap. Fits Yamaha Raptor, YFZ450, Warrior and Blaster ATV's ONLY.

Yamaha Raptor 660 Phat Bar Clamp (ModQuad)
Polished Billet Aluminum 1 1/8" Phat Bar Clamp. Includes base that mounts to stock stem, top clamp, detachable ignition switch mount and stainless steel hardware necessary for installation. Fits All Raptor 660 ATVs. Billet Aluminum
Black Anodized
Red Anodized

Yamaha Raptor 660 Parking Brake Block Off (ModQuad)
Parking Brake Block Off. Fits most Models. Made From Billet Aluminum. Choose from a variety of colors and patterns!! Billet Aluminum
Blue Anodized
Black Anodized
Red Anodized
Cross
Flames

Yamaha Raptor 660 Master Cylinder Cap (ModQuad)
Polished Aluminum Master Cylinder Cap. Fits Yamaha Banshee ATV's ONLY. Choose from a variety of designs!! Grooved Top and Sides
Cross
Flames Grooved and Scalloped
Scalloped Edge
Flames Scalloped

Yamaha Raptor 660 Wheel Knockoffs (ModQuad)
Polished Billet Aluminum Wheel Knockoffs. Fits all Yamaha ATV's. Flared Cutouts Style Holes Style Cutouts with Teardrops Style Maltese Cross Style

Yamaha Raptor 660 Inspection Plug (ModQuad)
Polished Billet Aluminum Inspection Plug. Fits Yamaha Raptor 660 ATV's. Choose from the following colors White Blue Black Anodized Red Anodized